Whiptail Sewn Termination
$30.00
Quantity
Whiptail sewn terminations are common on eye-to-eye friction cords and rope work positioning lanyards. Sewn terminations offer superior strength retention and improve safety while allowing full use of the line eye-to-eye. Whiptail sewn terminations are ideally suited to friction cords, kernmantle ropes, as well as 'used' climbing lines, ranging 8 mm to 14 mm in diameter (custom 16 mm available on request), but all ropes can have a sewn termination. Allow 200 mm for each sewn termination. Stitched by Treetools right here in New Zealand.
Minimum Qty
1 Items
Order Ships in
1 Bus Days
Availability
In Stock
- CNC controlled for consistent results
- Specially developed Whiptail stitch patterns retain maximum strength while keeping the termination as short as possible, allowing full use of the eye-to-eye cord
- Sewn terminations provide greater strength and security than knots
- Complies with international standards – download the Whiptail EN Certificate of Conformity
- Suitable for 8–14 mm rope, with custom 16 mm terminations available on request
- Custom eye sizes available on request
- Hardware such as thimbles can be sewn into the eye to help reduce chafing and wear in demanding environments – contact Treetools if you require hardware installed
- Sewn terminations are suitable for new and used ropes
- Stitched in New Zealand
- Keep in mind that a Whiptail Sewn Termination is a variable process requiring approximately 200 mm of cordage, depending on the eye specification. For example, if you purchase 3 m of rope for a lanyard and add sewn terminations at both ends, the finished product will be approximately 400 mm shorter. All cordage measurements are nominal; precise finished lengths vary due to rope construction, stitch length, cord diameter and measurement methods. Allow for these variations when calculating your rope requirements.
| Eye (Inner Ø) | |
|---|---|
| Tight Eye Ø | 20 mm |
| Large Eye Ø | 150 mm |
You may also like
-
SALEWhiptail Spliced Termination
$60.00
Optional rope identification
Add an NFC Rope Tag?
Digitally track, inspect and manage your gear using the Scannable APP with a Scannable NFC heat-shrinked under the rope label.
Add for $5.00 including GST
One NFC tag will be added for this cut length of rope, regardless of the number of metres ordered.
